Installing A Him - HP A6616 Installation Manual

Installing and Removing a HIM Installing and Removing a HIM

Installing a HIM

Follow these steps to install a HIM: Follow these steps to install a HIM:
Step1 Face the front panel of the router. Face the front panel of the router.
Step2 Locate the slot where you will install the HIM. Locate the slot where you will install the HIM.
Step3 Remove the two blank panels from the position where you will install the HIM. For how to Remove the two blank panels from the position where you will install the HIM. For how to Remove the two blank panels from the position where you will install the HIM. For how to
remove the blank panels, refer to " the blank panels, refer to
Step4 Gently push the HIM (with the components facing left) into the HIM slot along the slide rails, Gently push the HIM (with the components facing left) into the HIM slot along the slide rails, Gently push the HIM (with the components facing left) into the HIM slot along the slide rails,
and then push the ejector levers inward to lock the HIM in position. and then push the ejector levers inward to lock the HIM in position.
Figure 4-28 Push the HIM
Step5 Fasten the captive screws on the HIM clockwise with a flat-blade screwdriver. Fasten the captive screws on the HIM clockwise with a flat
Figure 4-29 Fasten the captive screws
Step6 Power on the router if the router is off. Power on the router if the router is off.
1) After the HIM is initialized, the following information will be displayed on the configuration After the HIM is initialized, the following information will be displayed on the configuration After the HIM is initialized, the following information will be displayed on the configuration
terminal screen:
#Apr 26 15:35:28:493 2008 #Apr 26 15:35:28:493 2008 HP DEV/1/SUB CARD INSERTED:
Trap 1.3.6.1.4.1.2011.2.23.1.12.1.13<hwSubcardInsert>: frameIndex is 0, slotIndex Trap 1.3.6.1.4.1.2011.2.23.1.12.1.13<hwSubcardInsert>: frameIndex is 0, slotIndex Trap 1.3.6.1.4.1.2011.2.23.1.12.1.13<hwSubcardInsert>: frameIndex is 0, slotIndex
0.5, subslotIndex 0.5.1
%Apr 26 15:35:28:493 2008 HP DEV/4/SUBCARD INSERTED: %Apr 26 15:35:28:493 2008
"Installing and Removing a Blank
Push the HIM into the slot
Fasten the captive screws
Panel" on page 4 " on page 4-38.
blade screwdriver.