Technical specifications
Item
Flash
Memory type and size
NVRAM
Combo interface
HIM
MIM
Hardware encryption
Hot swapping
Combo interface specifications
Specifications of combo interfaces on the FIP-300 and the FIP-110 are the same. For more
information, see
Available interface modules
Table 46 Maximum number of MIM and HIMs supported by routers fully configured with
FIP-300 modules
FIP/Interface module
FIP-300
MIM
HIM
FIP-310
The FIP-310 supports HIMs and MIM, and it provides 4 combo interfaces and 2 SFP ports.
Front panel
Figure 82 FIP-310 front panel
(1) Combo interface 1
Specification
8 MB
•
Default—Two 2-GB DDR3 SDRAMs
•
Maximum—Two 2-GB DDR3 SDRAMs
Install the DDR3 SDRAMs in subslots 1 and 3 in the rear of the FIP module.
128 KB
12
Copper ports (MDI/MDIX
autosensing)
Fiber ports
1 supported
1 supported
Supported
Supported
Table 41
and
Table
42.
HSR6802
2
2
2
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
1000 Mbps, full-duplex
HSR6804
4
4
4
(2) Combo interface 3
99
HSR6808
8
8
8