Sap-20Ge2Xp - HP FlexNetwork HSR6802 Installation Manual

SAP-20GE2XP

Front panel
Figure 88 SAP-20GE2XP front panel
(1) SFP ports (GE0 to GE15)
(3) SFP+ port 0
(5) Operating status LED (RUN)
Technical specifications
Item
Flash
Memory type and size
NVRAM
SFP ports
Combo interfaces
10G SFP+ ports
Hot swapping
Fixed Ethernet port specifications
Table 51 SFP port specifications
Item
Connector type
Transceiver module
type
Network
synchronization
1588v2.2 protocol
Interface standards
Operating mode
Specification
8 MB.
•
Default—Two 2-GB DDR3 SDRAMs.
•
Maximum—Four 2-GB DDR3 SDRAMs.
128 KB.
16 × SFP ports, 100/1000 Mbps auto-sensing.
Four.
•
Copper port—Straight-through/crossover autosensing:
10/100 Mbps, half/full-duplex.
1000 Mbps, full-duplex.
•
Fiber port—1000 Mbps, full-duplex.
2.
Supported.
Specification
LC
SFP
Supported
Supported
802.3, 802.3u, and 802.3ab
1000 Mbps, full duplex
105
(2) Combo interfaces (GE16 to GE19)
(4) SFP+ port 1