Sap Leds - HP FlexNetwork HSR6802 Installation Manual

LED
(yellow/green)
(green)
(yellow/green)

SAP LEDs

Figure 98 SAP-48GBE LEDs
Table 61 SAP-48GBE LED description
LED
(yellow/gree
n)
Status
Off
Steady green
Status LEDs
for SFP 0 to
Flashing green
SFP 3
Steady yellow
Off
Slow flashing (1
Hz)
RUN
Fast flashing (8
Hz)
Off
Status LEDs
Steady green
for SFP+ port 0
and SFP+ port
Flashing green
1
Steady yellow
Status
Off
Steady green
Status LEDs
Flashing green
for GE 0 to
GE 47
Steady yellow
Flashing yellow
Description
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000
Mbps.
The transceiver module has failed the POST.
No power input is available or the FIP has failed.
The FIP is operating correctly.
System software is being loaded.
CAUTION:
To avoid hardware damage, do not power off the
router, or insert or remove the FIP.
No link is present.
A 10 Gbps link is present.
Data is being received or transmitted at 10 Gbps.
The transceiver module has failed the POST.
1
Description
No link is present.
A 1000 Mbps link is present.
Data is being received or transmitted at 1000 Mbps.
A 10/100 Mbps link is present.
Data is being received or transmitted at 10/100
Mbps.
114
2