Technical Specifications - HP FlexNetwork HSR6802 Installation Manual

(3) SFP+ port 0
(5) Combo interface 2
(7) HIM/MIM slot

Technical specifications

Item
Flash
Memory type and size
NVRAM
Combo interface
10G Ethernet port
HIM
MIM
Hardware encryption
Hot swapping
Combo interface specifications
Specifications of combo interfaces on the FIP-310 and the FIP-110 are the same. For more
information, see
10 Gbps Ethernet port specifications
Table 47 FIP-310 10 Gbps Ethernet port specifications
Specification
Connector type
Transceiver module type
Interface standards
Operating mode
Available interface modules
Table 48 Maximum number of MIM and HIMs supported by routers fully configured with
FIP-310 modules
FIP/Interface module
FIP-310
MIM
HIM
Specification
8 MB
•
Default—Two 2-GB DDR3 SDRAMs
•
Maximum—Two 2-GB DDR3 SDRAMs
Install the DDR3 SDRAMs in subslots 1 and 3 in the rear of the FIP module.
128 KB
4
Copper ports (MDI/MDIX
autosensing)
Fiber ports
2
1 supported
1 supported
Supported
Supported
Table 41 and Table 42.
Description
LC
SFP+
802.3ae
10 Gbps (full duplex)
HSR6802
2
2
2
(4) SFP+ port 1
(6) Combo interface 0
10 Mbps, half/full-duplex
100 Mbps, half/full-duplex
1000 Mbps, full-duplex
1000 Mbps, full-duplex
HSR6804
4
4
4
100
HSR6808
8
8
8