Dot1X Supp-Proxy-Check - HP HSR6600 Command Reference Manual

Hide thumbs Also See for HSR6600:
Table of Contents

Advertisement

Examples
# Set the maximum number of attempts for sending an authentication request to a client as 9.
<Sysname> system-view
[Sysname] dot1x retry 9
Related commands
display dot1x

dot1x supp-proxy-check

Use dot1x supp-proxy-check to enable the proxy detection function and set the processing method on
the specified ports or all ports.
Use undo dot1x supp-proxy-check to disable the function on the specified ports or all ports.
Syntax
In system view:
dot1x supp-proxy-check { logoff | trap } [ interface interface-list ]
undo dot1x supp-proxy-check { logoff | trap } [ interface interface-list ]
In Ethernet interface view:
dot1x supp-proxy-check { logoff | trap }
undo dot1x supp-proxy-check { logoff | trap }
Default
The proxy detection function is disabled. Users can use an authenticated 802.1X client as a network
access proxy to bypass monitoring and accounting.
Views
System view, Ethernet interface view
Default command level
2: System level
Parameters
logoff: Logs off a user accessing the network through a proxy.
trap: Sends a trap to the network management system when a user is detected accessing the network
through a proxy.
interface interface-list: Specifies an Ethernet port list, which can contain multiple Ethernet ports. The
interface-list argument is in the format of interface-list = { interface-type interface-number [ to
interface-type interface-number ] } & <1- 1 0>, where interface-type represents the port type,
interface-number represents the port number, and & <1- 1 0> means that you can provide up to 10 ports
or port ranges. The start port number must be smaller than the end number and the two ports must be of
the same type. If no interface is specified, the command applies to all ports.
Usage guidelines
This function requires the cooperation of the iNode client software.
The proxy detection function must be enabled both globally in system view and for the intended ports in
system view or Ethernet interface view. Otherwise, it does not work.
140

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp 6600

Table of Contents