Examples
# Configure the device to synchronize portal user information with portal server pts:
Setting the synchronization probe interval to 600 seconds
•
•
Specifying the device to log off users if information of the users does not exist in the user
synchronization packets sent from the server in two consecutive probe intervals.
<Sysname> system-view
[Sysname] portal server pts user-sync interval 600 retry 2
reset portal connection statistics
Use reset portal connection statistics to clear portal connection statistics on a specific interface or all
interfaces.
Syntax
reset portal connection statistics { all | interface interface-type interface-number }
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all interfaces.
interface interface-type interface-number: Specifies an interface by its type and number.
Examples
# Clear portal connection statistics on interface GigabitEthernet 3/0/1.
<Sysname> reset portal connection statistics interface gigabitethernet 3/0/1
reset portal server statistics
Use reset portal server statistics to clear portal server statistics on a specific interface or all interfaces.
Syntax
reset portal server statistics { all | interface interface-type interface-number }
Views
User view
Default command level
1: Monitor level
Parameters
all: Specifies all interfaces.
interface interface-type interface-number: Specifies an interface by its type and number.
Examples
# Clear portal server statistics on interface GigabitEthernet 3/0/1.
<Sysname> reset portal server statistics interface gigabitethernet 3/0/1
188