Ssl Vpn Configuration Commands; Ssl-Vpn Enable; Ssl-Vpn Server-Policy - HP HSR6600 Command Reference Manual

SSL VPN configuration commands

The following matrix shows the command and router compatibility:
Command
SSL VPN commands

ssl-vpn enable

Use ssl-vpn enable to enable the SSL VPN service.
Use undo ssl-vpn enable to disable the SSL VPN service.
Syntax
ssl-vpn enable
undo ssl-vpn enable
Default
The SSL VPN service is disabled.
Views
System view
Default command level
2: System level
Usage guidelines
Before executing this command, make sure that an SSL server policy has been specified for the SSL VPN
service by using the ssl-vpn server-policy command.
Examples
# Specify the SSL server policy svpn and port 3001 for the SSL VPN service, and then enable the SSL VPN
service.
<Sysname> system-view
[Sysname] ssl server-policy svpn
[Sysname-ssl-server-policy-svpn] pki-domain domain1
[Sysname-ssl-server-policy-svpn] quit
[Sysname] ssl-vpn server-policy svpn port 3001
[Sysname] ssl-vpn enable
Related commands

ssl-vpn server-policy

ssl-vpn server-policy
Use ssl-vpn server-policy to specify the SSL server policy and port to be used by the SSL VPN service.
6602 HSR6602
Yes No
400
6604/6608/6616
Yes on routers with MCP MPU