HP HSR6600 Command Reference Manual page 234

In FIPS mode, the global password composition policy is as follows: A password must contain four types
of characters from uppercase letters, lowercase letters, digits and special characters, and each type
contains at least one character.
In both FIPS and non-FIPS mode, the password composition policy of a user group is the same as the
global policy, and the password composition policy of a local user is the same as that of the user group
to which the local user belongs.
Views
System view, user group view, local user view
Default command level
2: System level
Parameters
type-number type-number: Specifies the minimum number of character types that a password must
contain. The value range for the type-number argument is 1 to 4 in non-FIPS mode. The value for the
type-number argument is fixed to 4 in FIPS mode.
type-length type-length: Specifies the minimum number of characters that are from each character type
in the password. The value range for the type-length argument is 1 to 63.
Usage guidelines
The settings in system view have global significance and apply to all user groups. The settings in user
group view apply to all local users in the user group. The settings in local user view apply only to the local
user.
A password composition policy with a smaller application range has a higher priority. The system prefers
to use the password composition policy in local user view for a local user. If no policy is configured for
the local user, the system uses the policy for the user group to which the local user belongs. If no policy
is configured for the user group, the system uses the global policy.
Examples
# Specify that all passwords must contain at least three types of characters and each type must contain
at least five characters.
<Sysname> system-view
[Sysname] password-control composition type-number 3 type-length 5
# Specify that the passwords of user group test must contain at least three types of characters and each
type must contain at least five characters.
[Sysname] user-group test
[Sysname-ugroup-test] password-control composition type-number 3 type-length 5
[Sysname-ugroup-test] quit
# Specify that the passwords of local user abc must contain at least three types of characters and each
type must contain at least five characters.
[Sysname] local-user abc
[Sysname-luser-abc] password-control composition type-number 3 type-length 5
Related commands
display password-control
•
local-user
•
user-group
•
221