Password - HP HSR6600 Command Reference Manual

Default command level
3: Manage level
Parameters
user-name: Name for the local user, a case-sensitive string of 1 to 55 characters that does not contain the
domain name. It cannot contain any backward slash (\), forward slash (/), vertical bar (|), colon (:),
asterisk (*), question mark (?), left angle bracket (<), right angle bracket (>), and at sign (@) and cannot
be a, al, or all.
all: Specifies all users.
service-type: Specifies the users of a type.
ftp: FTP users. This keyword is not supported in FIPS mode.
•
lan-access: Users accessing the network through an Ethernet, such as 802.1X users. This keyword is
•
supported only on SAP interface modules that are operating in Layer 2 mode.
• portal: Portal users.
ppp: PPP users.
•
ssh: SSH users.
•
telnet: Telnet users. This keyword is not supported in FIPS mode.
•
terminal: Users logging in through the console, AUX, or Asyn port. In FIPS mode, this keyword must
•
be specified.
• web: Web users.
Usage guidelines
The following matrix shows the keyword and router compatibility:
Keyword
web
Examples
# Add a local user named user1.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1]
Related commands
display local-user
•
service-type
•

password

Use password to configure a password for a local user.
Use undo password to delete the password of a local user.
Syntax
password [ [ hash ] { cipher | simple } password ]
undo password
6602 HSR6602
Yes No
52
6604/6608/6616
No