Reset Radius Statistics; Reset Stop-Accounting-Buffer (For Radius) - HP HSR6600 Command Reference Manual

When the status of a RADIUS server changes. If a NAS sends a request but receives no response
•
before the maximum number of attempts is exceeded, it places the server to the blocked state and
sends a trap message. If a NAS receives a response from a RADIUS server it considered
unreachable, it considers that the RADIUS server is reachable again and also sends a trap
message.
• When the ratio of the number of failed transmission attempts to the total number of authentication
request transmission attempts reaches the threshold.
Examples
# Enable the device to send traps in response to accounting server reachability changes.
<Sysname> system-view
[Sysname] radius trap accounting-server-down

reset radius statistics

Use reset radius statistics to clear RADIUS statistics.
Syntax
reset radius statistics [ slot slot-number ]
Views
User view
Default command level
2: System level
Parameters
slot slot-number: Specifies the RADIUS statistics for the card in the slot represented by the slot-number
argument.
Usage guidelines
The following matrix shows the option and router compatibility:
Option
slot slot-number
Examples
# Clear RADIUS statistics.
<Sysname> reset radius statistics
Related commands
display radius statistics

reset stop-accounting-buffer (for RADIUS)

Use reset stop-accounting-buffer to clear buffered stop-accounting requests for which no responses have
been received.
6602 HSR6602
No Yes
81
6604/6608/6616
Yes