Check The Shipment - HP IntelliJack NJ1000G Quick Start Manual

the end of this guide. For the safety of people and equipment, only professional
network personnel should install the NJ1000G.
WARNING: To avoid possible injury or damage to equipment, you must
use power supply equipment that is safety certified according to UL, CSA,
IEC, or other applicable national or international safety requirements for the
country of use. All references to power supply in this document refer to
equipment meeting these requirements.

Check the Shipment

The NJ1000G is available in single- and 20-unit packs. Make sure that you have
the following items, which are included with each NJ1000G:
NJ1000G

Screw kit for wall mounting the NJ1000G

Male-to-male RJ-45 coupler cable (2 per NJ1000G) for connecting the Ethernet

cable from the network to the NJ1000G. NOTE: For use only if the network
cable is terminated with a female RJ-45 connector.
The following optional items in Table 3 may be useful, depending on your specific
installation requirements and the PoE capability of your network. If you choose to use
any of these items, be sure that they are on hand before you begin the installation.
Table 3
Part Number Description
3CNJ1000GPSE Optional mid-span
power injector
3CNJ1000GPSL Optional local power
supply
3CNJ1000GSTAND Optional desk stand For mounting the NJ1000G on the desktop
Purpose and 3C (Ordering) Numbers
For providing 802.3at PoE to an NJ1000G
For locally powering a single NJ1000G
NOTE: This item is required if the network does not
support Power over Ethernet.
6