Display Port-Security Mac-Address Block - HP HSR6600 Command Reference Manual

Related commands
port-security enable
•
port-security port-mode
•
• port-security ntk-mode
port-security intrusion-mode
•
port-security max-mac-count
•
port-security mac-address security
•
port-security authorization ignore
•
• port-security oui
port-security trap
•

display port-security mac-address block

Use display port-security mac-address block to display information about blocked MAC addresses.
Syntax
display port-security mac-address block [ interface interface-type interface-number ] [ vlan vlan-id ]
[ count ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
vlan vlan-id: Specifies a VLAN by its ID. The value range is 1 to 4094.
count: Displays only the count of the blocked MAC addresses.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
With no keyword or argument specified, the command displays information about all blocked MAC
addresses.
Examples
# Display information about all blocked MAC addresses.
<Sysname> display port-security mac-address block
MAC ADDR
--- On slot 2, no mac address found ---
From Port
193
VLAN ID