Domain Default Enable; Domain If-Unknown - HP HSR6600 Command Reference Manual

domain default enable

Use domain default enable to specify the default ISP domain. Users without any domain name carried in
the usernames are considered to be in the default domain.
Use undo domain default enable to restore the default.
Syntax
domain default enable isp-name
undo domain default enable
Default
The default ISP domain is the system predefined ISP domain system.
Views
System view
Default command level
3: Manage level
Parameters
isp-name: Name of the ISP domain, a case-insensitive string of 1 to 24 characters.
Usage guidelines
There can be only one default ISP domain.
The specified domain must already exist. Otherwise, users without a domain name in the username
cannot pass authentication.
To delete the ISP domain that is used as the default ISP domain, you must first change it to a non-default
ISP domain by using the undo domain default enable command.
Examples
# Create a new ISP domain named test, and configure it as the default ISP domain.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] quit
[Sysname] domain default enable test
Related commands
domain
•
• state
display domain
•

domain if-unknown

Use domain if-unknown to specify an ISP domain for users with unknown domain names.
Use undo domain if-unknown to restore the default.
Syntax
domain if-unknown isp-name
34