Local User Configuration Commands; Access-Limit - HP HSR6600 Command Reference Manual

Usage guidelines
By blocking an ISP domain, you disable offline users of the domain from requesting network services. The
online users are not affected.
Examples
# Place the ISP domain test to the blocked state.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] state block

Local user configuration commands

access-limit

Use access-limit to limit the number of concurrent users of the same local user account.
Use undo access-limit to remove the limitation.
Syntax
access-limit max-user-number
undo access-limit
Default
There is no limit to the number of users who concurrently use the same local user account.
Views
Local user view
Default command level
3: Manage level
Parameters
max-user-number: Maximum number of concurrent users of the same local user account, ranging from 1
to 1024.
Usage guidelines
This command takes effect only when local accounting is used for the user account.
This limit has no effect on FTP users because accounting is not available for FTP users.
Examples
# Limit the maximum number of concurrent users of local user account abc to 5.
<Sysname> system-view
[Sysname] local-user abc
[Sysname-luser-abc] access-limit 5
Related commands
display local-user
41