Radius Nas-Backup-Ip - HP HSR6600 Command Reference Manual

undo radius client
Default
The RADIUS client service is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
When the RADIUS client service is disabled, the following events occur:
No more stop-accounting requests of online users can be sent out or buffered, and the RADIUS
•
server can no longer receive logoff requests from online users. After a user goes offline, the RADIUS
server still has the user's record during a certain period of time.
The buffered accounting packets cannot be sent out and are deleted from the buffer when the
•
configured maximum number of attempts is reached, affecting the precision of user accounting.
If local authentication, authorization, or accounting is configured as the backup, the device
•
performs local authentication, authorization, or accounting instead after the RADIUS request fails.
Local accounting is only for monitoring and controlling the number of local user connections. It does
not provide the statistics function that the accounting feature generally provides.
Examples
# Enable the RADIUS client service.
<Sysname> system-view
[Sysname] radius client enable

radius nas-backup-ip

Use radius nas-backup-ip to specify a backup source IP address for outgoing RADIUS packets.
Use undo radius nas-backup-ip to restore the default.
Syntax
radius nas-backup-ip ip-address [ vpn-instance vpn-instance-name ]
undo radius nas-backup-ip
Default
A device is configured with no backup source IP address for outgoing RADIUS packets.
Views
System view
Default command level
2: System level
Parameters
ip-address: Backup source IP address for outgoing RADIUS packets. It must be the source IP address for
outgoing RADIUS packets that is configured on the backup device for stateful failover and cannot be
0.0.0.0, 255.255.255.255, a class D address, or a class E address.
77