Mac-Authentication Max-User - HP HSR6600 Command Reference Manual

Parameters
domain-name: Specifies an authentication domain name, a case-insensitive string of 1 to 24 characters.
The domain name cannot contain any forward slash (/), colon (:), asterisk (*), question mark (?),
less-than sign (<), greater-than sign (>), or at sign (@).
Usage guidelines
The global authentication domain is applicable to all MAC authentication enabled ports. A port specific
authentication domain is applicable only to the port. You can specify different authentication domains on
different ports.
A port chooses an authentication domain for MAC authentication users in this order: port specific
domain, global domain, and the default authentication domain.
Examples
# Specify the domain1 domain as the global authentication domain for MAC authentication users.
<Sysname> system-view
[Sysname] mac-authentication domain domain1
# Specify the aabbcc domain as the authentication domain for MAC authentication users on port
GigabitEthernet 3/0/1.
[Sysname] interface gigabitethernet 3/0/1
[Sysname-GigabitEthernet3/0/1] mac-authentication domain aabbcc
Related commands
display mac-authentication

mac-authentication max-user

Use mac-authentication max-user to set the maximum number of concurrent MAC authentication users
on a port.
Use undo mac-authentication max-user to restore the default.
Syntax
mac-authentication max-user user-number
undo mac-authentication max-user
Default
The maximum number of concurrent MAC authentication users on a port is 1024.
Views
Interface view
Default command level
2: System level
Parameters
user-number: Specifies a maximum number of concurrent MAC authentication users on the port. The
value range is 1 to 1024.
Examples
# Configure port GigabitEthernet 3/0/1 to support up to 32 concurrent MAC authentication users.
<Sysname> system-view
152