Display Stop-Accounting-Buffer (For Radius) - HP HSR6600 Command Reference Manual

Field
Accounting on request
Accounting on response
Dynamic Author Ext request
RADIUS sent messages statistic
Auth accept
Auth reject
Auth continue
Account success
Account failure
Server ctrl req
RecError_MSG_sum
SndMSG_Fail_sum
Timer_Err
Alloc_Mem_Err
State Mismatch
Other_Error
No-response-acct-stop packet
Discarded No-response-acct-stop
packet for buffer overflow
Related commands
radius scheme

display stop-accounting-buffer (for RADIUS)

Use display stop-accounting-buffer to display information about buffered stop-accounting requests.
Syntax
display stop-accounting-buffer { radius-scheme radius-scheme-name | session-id session-id |
time-range start-time stop-time | user-name user-name } [ slot slot-number ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
radius-scheme radius-scheme-name: Specifies buffered stop-accounting requests that are destined for
the accounting server defined in a RADIUS scheme. The RADIUS scheme name is a case-insensitive
string of 1 to 32 characters.
Description
Counts of accounting-on requests.
Counts of accounting-on responses.
Counts of dynamic authorization extension requests.
Statistics for sent RADIUS messages.
Number of accepted authentication packets.
Number of rejected authentication packets.
Number of authentication-continue packets received.
Number of accounting succeeded packets.
Number of accounting failed packets.
Number of server control requests.
Number of received packets in error.
Number of packets that failed to be sent out.
Number of packets for indicating timer startup failures.
Number of packets for indicating memory allocation failures.
Number of packets for indicating mismatching status.
Number of packets for indicating other types of errors.
Number of times that no response was received for stop-accounting
packets.
Number of stop-accounting packets that were buffered but then
discarded due to full memory.
68