Panasonic KX-T336 System Reference Manual page 119

3.16 E&M Card (KX-T96184)
PUSH
"E&M" is marked.
1) Connection of the E&M Line cord (twisted cable)
Connector type
50 pin (Amphenol 57JE
series or the equivalent)
• Connect the ground wire to the ground wire connector (GND).
•Insert the 50-pin connector (plug) of the E&M Line cord (twisted cable) into the 50-pin connector
(jack) on the E&M card.
Refer to the Installation of the Amphenol 57JE series on page 2-C-24.
2) Connection of cable pins
See pages 2-C-28-2 and 2-C-28-3.
• Insert this card into a free slot.
2-C-28-1
(70695)
To Terminal
Board from the
E&M Line