Table of Contents
Advertisement
T3SP-Series Operator's Manual
5.1.2 Reference Measurement
A Reference Measurement can be taken in addition to the TTC/12TC. The
software will move the zero point of the spatial axis (x = 0 cm) to the position
of the open-end (the coaxial cable or the TDR-probe tip).
The measurement is performed by clicking the
button in the toolbar
of the Main Window, by pressing F6 or by using the menu item Extras
Reference Measurement. The presence of the measurement is indicated by
a yellow LED below the TTC/12TC indicators.
48
931776 RevE
Advertisement
Table of Contents
