Ethernet 10/100Base-Tx Interface Cable Specifications - Nortel CVX 600 Hardware Installation Manual

Ethernet 10/100BASE-TX Interface Cable Specifications

The Ethernet 10/100BASE-TX interfaces provide unshielded twisted pair (UTP)
support.
The following figure shows the Ethernet 10/100BASE-TX interface connector:
Ethernet 10/100BASE-TX Pin and Signal Assignments
The following table lists the pin and signal assignments for these interfaces:
Pin
1
2
3
4
5
6
7
8
296-1011-202 Rel. 5.0, Doc. Rev. 02.01
8
7
6
5
4
3
2
1
CVX-0103A
Standard Interface Signal
TD+ (Transmit to UTP)
TD- (Transmit to UTP)
RD+ (Receive from UTP)
Not used
Not used
RD- (Receive from UTP)
Not used
Not used
Technical Specifications
Cable Specifications
Crossover
RD+ (Receive from UTP)
RD- (Receive from UTP)
TD+ (Transmit to UTP)
Not used
Not used
TD- (Transmit to UTP)
Not used
Not used
A-11