Roi - EverFocus H265 Series User Manual

3.2.4

ROI

You can configure the ROI settings on this page.
Bitrate: Select a stream type to be applied with the ROI bitrate.
ROI ID: Up to 8 ROI areas can be configured for each stream type.
Enable ROI: Select Enable to enable the configured ROI area(s).
ROI Level : Select an ROI level for each area. The higher the level, the better the image quality in ROI area.
Non-ROI FPS (1-29): Select a FPS to be applied to the non-ROI areas. Lower FPS can not only reduce the
bandwidth, but also increase the recording time to the on-camera SD card.
Click Refresh to refresh the page; click Apply to save the settings.
To set up ROI:
1. Set up the configurations including Bitrate, ROI ID, Enable ROI, ROI Level and FPS for the Non-ROI FPS.
2. On the preview window, draw a rectangle area (red color) to apply with the ROI. You can only configure 1
ROI area for each ROI ID. Up to 8 ROI ID can be configured.
3. To delete the ROI area, click the Clear button.
4. Click the Apply button to apply the settings.
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
15