Cj1W-Pnt21 Profinet Io Controller Dtm - Omron CJ1W-PNT21 Operation Manual

CJ1W-PNT21 PROFINET IO Controller DTM

4-3

CJ1W-PNT21 PROFINET IO Controller DTM

CJ1W-PNT21 PROFINET IO
Controller DTM
4-3-1 DTM User Interface
Opening the DTM
42
To allow configuration and data monitoring from within CX-ConfiguratorFDT a
CJ1W-PNT21 PROFINET IO Controller DTM is installed. The DTM shows up
in the Device Catalogue under the following name:
/i
DTM Name
CJ1W-PNT21 PROFINET IO
Controller
The PROFINET IO Controller DTM has three main user interface components.
• DTM Configuration User Interface
This user interface facilitates configuration of the IO Controller Unit.
• DTM PROFINET Identification.
This user interface facilitates detection of IO Devices and configuration of
IO device Names.
• DTM Diagnostics User Interface
The DTM Diagnostics User Interface facilitates Unit status determination,
IO Device status determination, and changing the Unit's PROFINET
operational mode.
This section provides an overview of the PROFINET IO Controller DTM, and
discusses the user interfaces.
To open the CJ1W-PNT21 IO Controller DTM:
• Select and double-click the IO Controller DTM in the Network view.
• Select and right-click the IO Controller DTM in the Network view. Next,
select Configuration from the context menu.
The IO Controller DTM Configuration User Interface, which is displayed in the
CX-ConfiguratorFDT DTM view is shown below.
• I/O Configuration of PROFINET IO Controller Unit.
• Monitoring of PROFINET IO Controller Unit.
• Provide an Acyclic communication channel with
PROFINET IO Devices.
Figure 3.6: DTM user interface
Section 4-3
Functions