Omron CJ1W-PNT21 Operation Manual page 55

CX-ConfiguratorFDT Main Window
Error Log view Context
Menu
Menu Item
Clear all entries
Copy to clipboard
Hide
FDT Monitoring view
Note
Error Log view Context
Menu
Description
Clears the entire Error Log view
Copies the entire contents of the Error Log view to the clipboard.
Hides the Error Log view
The FDT Monitoring view displays the communication between the FDT
Container application (i.e. CX-ConfiguratorFDT) and any of the DTMs. The
communication is listed as a sequence of function calls from the CX-Profibus
to a DTM and vice versa.
The FDT Monitoring view is hidden by default. After starting CX-ConfiguratorFDT, the
window will be displayed, by selecting the View - FDT Monitoring option from the
main menu.
The purpose of the FDT Monitoring view is troubleshooting in case problems
occur with third party DTMs. The contents of the window can be copied to the
clipboard, to allow it to be pasted into another document or into an E-mail. The
messages themselves as well as the sequence of messages may hold
additional clues in case of problems.
The format used in the FDT Monitoring view is:
Time: <Time> Date: <Date> - <Information Type> <message>
The message may include the name of the DTM involved in the
communication. The figure below shows an example of an FDT Monitoring
message sequence. This example sequence is generated when opening a
CJ1W-PNT21 PROFINET IO Controller Unit DTM.
Right-clicking in the Error Log view displays a context menu providing the
options listed below.
/i
Menu Item
Clear all entries
Copy to clipboard
Hide
Figure 4.5: FDT monitor
Description
Clears the entire FDT Monitoring view
Copies the entire contents of the FDT
Monitoring view to the clipboard.
Hides the FDT Monitoring view
Section 4-2
Equivalent menu command
---
---
View - Error Logging
Equivalent menu
command
---
---
View - FDT Monitoring
41