Omron CJ1W-PNT21 Operation Manual page 43

Installation of Configuration Software
Updating the Device
Catalogue
Select the preferred Language for the Setup and click OK.
3 The user is then guided through the installation process.
Pressing the Next button will start the installation.
4 When done, the installation program will notify the user of its completion.
The update of the Device Catalogue of the FDT Container is required
After installation of the PROFINET IO Generic Device DTM the Device
Catalogue in the FDT Container needs to be updated. This makes PROFINET
IO devices that supply a GSDML file for configuration visible in the device
catalogue. For CX-ConfiguratorFDT the following procedure applies.
1,2,3... 1 Open the Device Catalogue window in CX-ConfiguratorFDT.
2 Press the Update button to initiate the update sequence.
After updating, the GSDML file based PROFINET IO Devices will be shown in
the list of available devices. It can now be used to setup a PROFINET IO
network and configure the PROFINET IO Controller Unit.
Section 3-5
29