Omron CJ1W-PNT21 Operation Manual page 50

CX-ConfiguratorFDT Main Window
Invoking the Device
Catalogue
DTM view Layout
Note
DTM List Window
36
The main layout of the Device Catalogue is shown below:
DT M categories
Update Device C atalogue
The Device Catalogue window is opened by either selecting the corresponding
icon in the CX-ConfiguratorFDT toolbar or by selecting View - Device
Catalogue from the menu. Both options have a toggle function; selecting the
option again will close the Device Catalogue.
The left view allows selection of specific groups of DTMs to be displayed. The
right view lists the DTMs, which are installed on the PC and which are
available for setting up a network. A selection of DTMs is made by selecting a
specific group in the left view.
The list makes no distinction between normal DTMs and GSDML files which have
been loaded through the Generic IO Device DTM. When both DTM and GSDML are
available for one device, it is recommended to use the DTM.
The list items in the right view are described in the following table.
/i
Column Description
Device The Device column contains the names of the DTMs, as provided
by the DTM or the GSDML file. If the device is defined by a GSDML
file, the Generic IO Device DTM reads out the GSDML file entry
"Model Name". The string provided by this variable is the name
displayed in the list.
Version The version number defines the revision number of the device. If
the device is defined by a GSDML file, the Generic IO Device DTM
reads out the GSDML file entry "Revision". The string provided by
this variable is the version number displayed in the list.
Device name
V ers ion number
Ins tall a new G S D file
Add s elected device to the network
Figure 4.2: Device catalogue
Section 4-2
F ile date
V endor name