Toyota Kluger 2004 Owner's Manual page 99

-Installation with ISOFIX rigid
anchors (ISOFIX child
restraint system)
V13415
The exclusive fixing bars for child re-
straint systems using ISO specifications
are installed in the outside second seat.
The bars are installed in the seat cushion
of both outside second seats.
Child restraint systems using quasi-ISO
specifications can be fixed to these
exclusive fixing bars. In this case, it is
not necessary to fix the child restraint
system with a seat belt.
NOTICE
Ask the manufacturer of the child re-
straint system if the child restraint
system is approved for this model.
92
V13440
CHILD RESTRAINT SYSTEM
INSTALLATION
1. Widen the gap between the seat
cushion and seatback slightly and
confirm the position of the exclusive
fixing bars near the button on the
seat back.
2. Latch the buckles onto the anchor-
age.
If your child restraint system has an upper
anchorage strap, it should be anchored
with the child restraint anchorage. (For the
installation of the child restraint anchor-
age, see "-Child restraint anchor fittings"
on page 89 in this Section.)
For installation details, refer to the instruc-
tion manual equipped with each product.