Toyota Kluger 2004 Owner's Manual page 240

2
V40068
2. Use the front towing eyelet in the lug-
gage compartment. Secure it to the
hole on the bumper by turning clock-
wise. (For the towing eyelet location,
see "-Required tools and spare tire"
on page 220 in this Section.)
3. Tighten the front towing eyelet securely
by a wheel nut wrench.
&
CAUTION
When installing the eyelet on the ve-
hicle, be sure to tighten the front
eyelet securely. If the eyelet is loose,
it may come off when being towed
and result in death or serious injury.
-Emergency towing eyelet
precautions
• Before emergency towing, check that
the eyelet is not broken or damaged
and that the installation bolts are not
loose.
• Fasten the towing cable or chain se-
curely to the eyelet.
• Do not jerk the eyelet. Apply steady
and even force.
• To avoid damaging the eyelet, do not
pull from the side or at a vertical
angle. Always pull straight ahead.
233