Toyota Kluger 2004 Owner's Manual page 21

If the wireless remote control key does
not actuate the doors, or operate from a
normal distance, or the indicator on the
key is dimmed or does not come on:
• Check for closeness to a radio trans-
mitter such as a radio station or an
airport which can interfere with normal
operation of the key.
o
The battery may have been consumed.
Check the battery in the key. To
replace the battery, see "-Replacing
battery" on page 15.
If you lose your wireless remote control
key, contact your Toyota dealer as soon
as possible to avoid the possibility of
theft, or an accident. (See "If you lose
your keys" on page 235 in Section 4.)
14
-Locking and unlocking
doors
Locking operation
Unlocking operation
To lock and unlock all the side doors
and back door, push the switches slow-
ly and securely.
To lock: Push the "LOCK" switch. All the
side doors and back door are locked si-
multaneously. At this time, one beep will
be heard, and the turn signal lights flash
once.
Check to see that all the side doors and
back door are securely locked.
If any of the side doors or back door is
not securely closed, locking cannot be
performed by the "LOCK" switch and a
beep will sound continuously for 10 sec-
onds. However, if the key is in the igni-
tion, a beep will not sound.
To stop the beep, close all the side doors
and back door securely or push the
"UNLOCK" switch.
The beep can be disabled. For details,
contact your Toyota dealer.
To unlock: Push the "UNLOCK" switch. All
the side doors and back door are un-
locked simultaneously. At this time, two
beeps will be heard, and the turn signal
lights flash twice.