Toyota Kluger 2004 Owner's Manual page 98

3. Fix the child restraint system with
the seat belt.
Attach the child restraint anchor at-
taching clip to the exposed child re-
straint anchor fitting. Make sure the
clip is securely attached and tighten
the upper anchorage strap.
For instructions to install the child re-
straint system, see "Child restraint" on
page 74 in this Section.
&
CAUTION
Make sure the seat belt is securely
locked, and check that the child re-
straint system is secure by pushing
and pulling it in different directions.
Follow all the installation instructions
provided by its manufacturer.
4. Replace the head restraint and lift it
up to the uppermost lock position.
V13356
Be sure to close all covers when the child
restraint anchor fittings are not in use.
91