Toyota Kluger 2004 Owner's Manual page 54

&
CAUTION
• Do not allow passengers to ride on
the flattened seat while driving; use
the seat in the normal position.
• After returning the seat to its origi-
nal position, try pushing the seat
and seatback forward and rearward
to make sure it is secured in place.
Be certain to replace head restraint.
Flattening seatbacks
(power seat)
1
To flatten the seatbacks, do the follow-
ing:
1. Hold the center of the lever and pull
it up, sliding the second seat to the
rear-most position. Then pull the
seat forward slightly until it locks.
2. Remove the head restraint. Push the
seat position adjusting switch for-
ward to slide the front seat to the
front-most position.
47