Toyota Kluger 2004 Owner's Manual page 88

5. To remove the baby (infant) seat, press
the buckle-release button and allow the
belt to retract completely. The belt will
move freely again and be ready to
work for an adult or older child passen-
ger. Unhook the child restraint attach-
ing clip from the child restraint anchor
fitting.
(B) CHILD (CONVERTIBLE) SEAT
INSTALLATION
A child (convertible) seat is used in
forward-facing or rear-facing position
depending on the child's age and size.
When installing, follow the manufactur-
er's instruction about the applicable
age and size of the child as well as
directions for installing the child re-
straint system.
&
CAUTION
• Do not install a child restraint sys-
tem on the second (or third) seat if
it interferes with the lock mecha-
nism of the front (or second) seats.
This can cause death or serious in-
jury to the child and front passen-
ger (or second seat passengers) in
case of sudden braking or a colli-
sion.
• If the driver's seat position does
not allow sufficient space for safe
installation, install the child re-
straint system on the left second
seat.
81