Toyota Kluger 2004 Owner's Manual page 91

V13275
When installing the child restraint attach-
ing clip to the child restraint anchor fitting,
raise the head restraint of the second
seat and pass the strap between the head
restraint supports.
84
&
CAUTION
Push and pull the child restraint sys-
tem in different directions to be sure
it is secure. Follow all the installation
instructions provided by its manufac-
turer.
5. To remove the child (convertible) seat,
press the buckle-release button and al-
low the belt to retract completely. The
belt will move freely again and be
ready to work for an adult or older
child passenger. Unhook the child re-
straint attaching clip from the child re-
straint anchor fitting.