Toyota Kluger 2004 Owner's Manual page 147

Table of Contents

Advertisement

1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the
desired
station.
(See
"TUNE"
or
"SEEK".) Push and hold down the button
until you hear a beep-this will set the
station to the button. The preset button
number will appear on the display.
To recall a preset station: Push the button
for the station you want. The preset but-
ton number and station frequency will ap-
pear on the display.
This radio can store one AM and two FM
stations for each button. (The display will
show "AM", "FM1" or "FM2" when you
push "AM" or "FM1/2" button.)
~
(Eject button)
Push the cassette tape eject button to
eject a cassette. Push the compact disc
eject button to eject a compact disc.
After you turn the ignition to "LOCK", you
will be able to eject a cassette or disc but
you will not be able to reinsert it.
140
<01111•111/ ........ (Reverse/Fast-forward button)
Cassette player
Push ............ (preset button 2) to fast-for-
ward a cassette tape. "FF" will appear on
the display. Push
"<111111<111111"
(preset button 1)
to rewind a tape. "REW" will appear on
the display.
To stop the tape while it is fast-forward-
ing, push ............ or "TAPE" button. To stop
the tape while it is rewinding, push "<llllll<llfl"
or "TAPE" button.
If a tape rewinds completely, the cassette
player will stop and then play that same
side. If a tape fast-forwards completely,
the cassette will play the other side of the
tape using the auto-reverse feature.
Compact disc player
Push and hold ............ (preset button 2) or
"<111111<111111"
(preset button 1) to fast forward or
reverse within a compact disc. When you
release the button, the compact disc play-
er will resume playing.
AM
Push the "AM" button to turn on the radio
and select the AM band. "AM" will appear
on the display.
AUTO·P (Auto preset button)
This button is used to automatically preset
frequencies of up to 6 radio stations for
each band.
Push "AUTO·P" until a beep is heard. If
the radio cannot seek out any stations, it
will receive the frequency before you oper-
ate "AUTO·P".
When auto preset is complete, two beep
sounds are heard.
When a new broadcast station is memo-
rized, all stations memorized in the preset
buttons are erased.
When less than six frequencies are to be
received, nothing is memorized in the re-
maining preset buttons.
To cancel midway, press the button once
again.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents