Toyota Kluger 2004 Owner's Manual page 148

DISC (Compact disc)
Push the "DISC" button to play a compact
disc.
When the audio system is set into com-
pact disc operation, the display shows the
track, or track and disc number currently
being played.
Error messages
If the player malfunctions, your audio sys-
tem will display one of the four following
error messages.
"WAIT": The compact disc player unit
may be too hot. Allow the player to cool
down.
"Err 1": The disc may be dirty, damaged
or inserted incorrectly (up-side down).
Clean the disc and re-insert it.
"Err 3": There is a problem inside the
system. Eject the disc or magazine. Set
the disc or magazine again.
"Err 4": Over-current. Ask your Toyota
dealer to inspect.
If the malfunction still exists, take your
vehicle to your Toyota dealer.
1\ DISC V
With compact disc changer only-
Use these buttons to select a disc you
want to listen to.
Push either side of the button until the
number of the disc you want to listen to
appears on the display.
Dolby® [][) B NR*
If you are listening to a tape that was
recorded with Dolby® B Noise Reduction,
push "[][]" (preset button 6).
"_gg_"
will
appear on the display. Push the button
again to turn off Dolby® B NR.
The Dolby NR mode reduces tape noise
by about 10 dB. For best sound reproduc-
tion, play your tapes with this button on
or off according to the mode used to re-
cord the tape.
*: Dolby noise reduction manufactured under license from
Dolby Laboratories Licensing Corporation. "DOLBY" and the
double D symbol
[J[J
are trademarks of Dolby Laboratories
Licensing Corporation.
FM1/2
Push the "FM1/2" button to turn on the
radio and select the FM band. "FM1" or
"FM2" will appear on the display. This
system allows you to set twelve FM sta-
tions, two for each of the preset button.
LOUD (Loudness)
To activate this feature, push the "LOUD"
button. As long as "LOUD" appears on the
display, this feature is active. This feature
improves sound clarity at low volume by
emphasizing high-pitched and low-pitched
tones. This is done to compensate for the
human ear's natural tendency to concen-
trate on mid-range sound. To deactivate
this feature, push "LOUD" again.
MODE (Manual tone and sound balance
adjustment function)
Each time you push the "MODE" knob, the
mode changes. To adjust the tone and
balance, turn the knob.
BAS: Adjusts low-pitched tones. The dis-
play ranges from -5 to 5.
TRE: Adjusts high-pitched tones. The dis-
play ranges from -5 to 5.
FAD: Adjusts the sound balance between
the front and rear speakers. The display
ranges from F7 to R7.
BAL: Adjusts the sound balance between
the right and left speakers. The display
ranges from L7 to R7.
141