Specifications; Common Specifications; Current Consumption And Weights - Omron DST1-ID12SL-1 Operation Manual

Specifications

4-1 Specifications
4-1-1

Common Specifications

Item
Communications power supply voltage
I/O power supply voltage
EMC
Vibration resistance
Shock resistance
Operating temperature
Relative humidity
Operating environment
Storage temperature
Mounting
Degree of protection
Overvoltage Category
4-1-2

Current Consumption and Weights

Model
DST1-ID12SL-1
DST1-MD16SL-1
DST1-MRD08SL-1
DST1-XD0808SL-1
Note
Note
88
11 to 25 V DC (Supplied from the communications connector.)
20.4 to 26.4 V DC (24 V DC, −15% to +10%)
Conforms to IEC61131-2.
10 to 57 Hz: 0.35-mm single amplitude,
57 to 150 Hz: 50 m/s
150 m/s
DST1-MRD08SL-1: 100 m/s
−10 to 55°C
10% to 95% (with no condensation)
DST1-MRD08SL-1: 10% to 85% (with no condensation)
No corrosive gases
−40 to 70°C
35-mm DIN Track
IP20
II
Communications current
consumption
100 mA at 24 V DC
110 mA at 24 V DC
100 mA at 24 V DC
110 mA at 24 V DC
This does not include the current consumption of the externally connected
devices.
The maximum current that can be supplied to the I/O power terminal is shown
below.
Model
DST1-ID12SL-1
DST1-MD16SL-1
DST1-MRD08SL-1
DST1-XD0808SL-1
The I/O power supply current is calculated as shown below.
• Input device and test output power terminal
I/O power supply current that can be supplied to V and G terminals =
input current (of number of points used) + test output current (of number
of points used) + current consumption for I/O power supply
Specifications
2
2
for 11 ms
2
for 11ms
Current consumption for I/O
power supply (See note.)
70 mA at 24 V DC
50 mA at 24 V DC for inputs
130 mA at 24 V DC for outputs
80 mA at 24 V DC for inputs
130 mA at 24 V DC for outputs
50 mA at 24 V DC for inputs
130 mA at 24 V DC for outputs
Terminals
V, G
V0, G0
V1, G1
V0, G0
V1, G1
V0, G0
V1, G1
Section 4-1
Weight
420 g
420 g
600 g
420 g
I/O power supply current
2.94 A
2.90 A
4.13 A
2.90 A
0.13 A
2.90 A
4.13 A