B Specifications - Omron SYSMAC C200H-DA002 Operation Manual

C200H-AD002 Analog Input Unit
General Specifications
All general specifications of the C200H-AD002 Analog Input Unit conform to those of the C Series.
Performance Specifications
Item
Number of analog inputs
Input signal range (note 1)
Max. input signal (note 2)
Input impedance
Resolution
Converted output data
(note 3)
Accuracy (note 4)
Conversion time (note 5)
Isolation
External connectors
Power consumption
Dimensions
Weight
Note 1. When the input range is set to –10 V to +10 V, the most significant bit (15
2. Operation in ranges beyond the maximum input signals will damage the Unit. Operate within the ranges
listed above.
3. The accuracy is given for full scale (4000). For example, an accuracy of ±0.80% means a maximum
error of ±32 (BCD).
4. This is the time it takes for a full range input signal to be converted and to be stored in the memory of the
Unit. It takes at least one cycle before the converted data is read by the CPU.
Appendix B
Specifications
8 max.
Voltage input –10 to +10 V
+1 to +5 V
0 to 10 V
Current input 4 to 20 mA
±15 V
Voltage input
±30 mA
Current input
Voltage input 1 MΩ min.
250 Ω (rated value)
Current input
1/4000 max. (full scale)
±10 V range: 87D0 to 07D0
Binary data
Other ranges: 0000 to 0FA0
±10 V range: A000 to 2000
BCD data
Other ranges: 0000 to 4000
°
Voltage input: ±0.25% (full scale)
25 C
Current input: ±0.40% (full scale)
° ° Voltage input: ±0.60% (full scale)
0 to 55 C
Current input: ±0.80% (full scale)
2.5 ms max./point
Between input terminals and PC: photocoupler
Between input terminals: none
34-pin connector (Honda Communications Industries)
Connector for the cable side (One is included with each Unit.)
MR-34LFG Set MR-34LFG Set Connector: MR-34FG Connector: MR-34FG
Cover: MR-34L
450 mA max. at 5 VDC
34.5 x 130 x 109 (W x H x D) mm (see last page of this appendix)
290 g
Specifications
Set for each input number in the allocated DM area.
th
bit) becomes the sign bit.
47