In Pwr/Out Pwr Indicators; I/O Indicators - Omron DST1-ID12SL-1 Operation Manual

Indicators
4-2-3

IN PWR/OUT PWR Indicators

LED Indicators
IN PWR
OUT PWR
4-2-4

I/O Indicators

Note
Name Color
IN0 to INn Yellow
(See note.)
Red
OUT0 to OUTn Yellow
(See note.)
Red
Note
The IN PWR and OUT PWR indicators indicate the status of the I/O power
supplied to the DST1-series Safety I/O Terminals.
Color Status
Green
Green
: Lit
The I/O indicators show the ON/OFF and error status of I/O.
The indicators are not lit for safety inputs and safety outputs for which the
Safety Input Channel Mode or Safety Output Channel Mode is set to Not
Used.
Status
Safety input ON.
Safety input OFF.
• Error detected in safety input circuits.
• Discrepancy error has occurred set for Dual Channel Mode.
Error detected in the other input circuit set for Dual Channel Mode (no error
in this circuit)
Safety output ON.
Safety output OFF.
• Error detected in safety output circuits.
• EDM error (See note 2.)
Error detected in the other output circuit set for Dual Channel Mode (no
error in this circuit)
: Lit
(1) "n" indicates the terminal number.
(2) Applicable to the DST1-XD0808SL-1 only.
Normal status of input power
Input power is not supplied.
Normal status of output power
Output power is not supplied.
Output power exceeds the upper/lower limit of the power range.
A system error has occurred.
: Flashing : Not lit
Meaning
: Flashing : Not lit
Section 4-2
Meaning
91