Standard Models; Input Terminals And I/O Terminals; Logic Terminals - Omron DST1-ID12SL-1 Operation Manual

Standard Models

1-2 Standard Models
1-2-1

Input Terminals and I/O Terminals

Note
1-2-2

Logic Terminals

Note
As shown in the following tables, the DST1 Series consists of Input Terminals,
I/O Terminals, and Logic Terminals.
Model
Safety
inputs
DST1-ID12SL-1 12 inputs
DST1-MD16SL-1 8 inputs
DST1-MRD08SL-1 4 inputs
Each test output can be set to function as a test output or a standard output.
Test outputs are used in combination with a safety input. Broken wires in an
external indicator can be detected for terminal T3 only.
Model
Safety
inputs
DST1-XD0808SL-1 8 inputs
(1) Each test output can be set to function as a test output or a standard out-
put. Test outputs are used in combination with a safety input. Broken
wires in an external indicator can be detected for terminal T3 only.
(2) Use Network Configurator version 2.0 or higher to set the DST1-
XD0808SL-1.
I/O capacity
Test outputs
Semiconductor
outputs
4 outputs -
(See note.)
4 outputs 8 outputs
(See note.)
4 outputs -
(See note.)
I/O capacity
Test outputs
Semiconductor
outputs
4 outputs 8 outputs
(See note 1.)
Section 1-2
Safety outputs
Relay
outputs
-
-
4 outputs
Safety outputs
Relay
outputs
-
5