Clear Counter; Job Settings - Pitney Bowes W660 Operator's Manual

Appendix A • Control Panel Menus

6. Clear Counter

7. Job Settings

A-18
Use this option to clear the piece (batch) counter.
1. Press the + or – buttons to scroll through the Main
Menu options until the 6. CLEAR PIECE COUNTER
option displays on the LCD panel.
2. Press the Enter button to select this option.
3. Press the + or – button to select CLEAR PIECE
COUNTER, (+ YES or – NO).
4. After you've made your selection, press the Menu button
several times to back out of the Menu, until the printer
displays OFF LINE. Then, press the On Line button to
enable the printer.
The W660/W680 Printer can hold eight job presets in memory.
This eliminates the need for changes to the printer setup when
you change print jobs. The options on this menu are A. LOAD
and B. SAVE.
A. Load
Select this option to retrieve a previous job setup. Press + (for
more) or – (for less) to increase or decrease the desired job
number. Press the Enter button to select the desired option.
B. Save
Use this option to save the current envelope setup (address
position, barcode position, number of lines per inch, and so on).
The printer saves the setup as a job number (1 through 8). You
must keep a record of these setups and the number you as-
signed. Press + (MORE) or – (LESS) to increase or decrease the
desired job number. Press the Enter button to select the desired
option.
Pitney Bowes W660/W680 Operator Guide