Pitney Bowes W660 Operator's Manual page 120

Pitney bowes inc. printer user manual
Table of Contents

Advertisement

Appendix B • Specifications
4 • Operating the Printer
Material
Specifications
B-6
Approved Media
The paper types listed below are approved for use with the W660/W680 Printer. Please
note that the dimensional limits above apply in all cases, and that all media (flats,
envelopes, postcards, catalog envelopes, etc.) must be without windows, unstuffed
and unsealed.
White Wove
Bond paper
Recycled paper
Coated paper
Card stock
Brown kraft
Manila
Material Size and Thickness
Width
Minimum
3" (76mm)
Maximum
12.5" (317.5mm)
Also see the table on the next page.
Material Notes
Envelopes have a flap along the long edge and are processed by the printer non-flap
edge first. Envelopes may have either a diagonal or straight edge along the envelope
flap.
Booklets are defined as media having physical dimensions 6 x 9" or larger. Booklets
have an opening along their long edge which is covered by a flap with an adhesive seal.
Catalog envelopes have an opening along their short edge which is closed by a flap
with an adhesive seal.
Postcards have no folds or bends. The printable side may have a higher surface
roughness than the non-printable side.
Self-mailers may be of "C," "Z," or 1/2-folded construction. They may not exceed the
maximum allowable thickness as specified on the previous page and must be tabbed
per postal regulations.
A catalog may consist of multiple pages bound by adhesive or tabs on the feed edge
or at 90 degrees with respect to the feed edge.
Sheet stock may consist of 16 to 28 lb. bond as well as 60 to 80 lb. coated stock. The
size and thickness constraints specified above apply.
Height
5" (127mm)
15" (381mm)
Pitney Bowes W660/W680 Operator Guide
Thickness
.003" (.0762mm)
.125" (3.175mm)

Advertisement

Table of Contents
loading

This manual is also suitable for:

W680

Table of Contents