Pitney Bowes W660 Operator's Manual page 118

Appendix B • Specifications
4 • Operating the Printer
Left
NOTES:
1. All edges are viewed from the front surface of the material.
2. Two clear zones, each 0.3 inches wide, are required on the mailpiece to allow clearance for the exit rollers.
3. Printing is allowed to the top edge of the media, however print quality will be degraded.
4. The lower 5/8 inch of the material is reserved for the lower right barcode when it is used.
Equipment
Specifications
(continued)
B-4
Trailing Edge (Top)
Feed Direction
Leading Edge (Bottom)
Printhead/InkJet Cartridges
Cartridges: User-replaceable ink jet
Single Black Ink Cartridge - 711-1
Single Color Ink Cartridge - 660-5 - W680 only
4 Pack of Black Ink Cartridges - 660-9
Print Position Accuracy
For a #10 envelope (Acclaim #10 WW Commercial, Regular):
Horizontal: within +/- 1.5mm
Vertical: within +/- 1.5mm
Skew: within +/- 1 degree
For other media:
Horizontal: within +/- 3.0mm
Vertical: within +/- 3.0mm
Skew: within +/- 2-1/2 degrees
Environmental Limits
Operating Conditions
Flap on opposite side
Temperature: 55 to 95°F (12 to 35°C)
Humidity: 8 to 80%
Maximum Wet Bulb Temperature: 80°F
(27°C)
Pitney Bowes W660/W680 Operator Guide
Right