Adjust The Upper Exit Rollers - Pitney Bowes ADDRESSRIGHTTM DA900 Operating Manual

6. Adjust the
Upper Exit
Rollers
SV60970-OG Rev. A
DA900 AddressRight
The upper exit rollers will move when you move printheads
one and six. You may need to adjust them so that they do not
touch any printed area of the exiting material.
Note that when you adjust the rollers, you are also moving
printheads 1 and 6 because they are attached.
To adjust the upper exit rollers:
1. Loosen the locking knob on the printhead holder assem-
bly.
2. Slide printheads 1 and 6 to where you want them.
3. Tighten the locking knob.
5
Printer
™
5-9