Table of Contents
Advertisement
7
Maintenance
Setting "Ink Left"
Feature When
Replacing
Cartridges
(continued)
7-4
6. To check that you have identified ("filled") all of the
cartridges, press and hold the Test Print key until the
Service Menu appears. Then use the – key to display the
following message:
Service Menu:
100% 100% 100% 100% 100% 100%
NOTE: Step 6 can also be used to check the level of the ink
in the cartridges at any time during operation of the printer.
When replacing empty cartridge with new cartridge:
1. When the ink in the cartridge reaches a low level, the
printer will stop feeding and the following message will
be displayed:
Printer Offline
Head n Low:
NOTE: "nnn" is the number of the head with a low ink
supply.
2. Press Enter and the following will be displayed:
Printer Offline
ENTER when head is filled
3. Replace the cartridge and press Enter again. The display
will change to the following:
Printer Offline
Head n has a new cartridge
IMPORTANT: You should replace a cartridge when the
printer indicates the ink has run out. If you don't, or reset
the ink left setting to circumvent the low ink warning, the
cartridge will run out of ink very soon after and prevent
you from printing.
Store the inkjet cartridges in the docking station (photo, next
page) or in an area that is free of dust and paper particles. Do
not keep them in an area that is too dry for a long period of
time. Discard used cartridges in the normal manner.
Ink Levels
nnn
Press ENTER
nnn
nnn
SV60970-OG Rev. A
Advertisement
Table of Contents
