Table of Contents
Advertisement
3
Meet the DA900 Printer
Printer Components
3-2
3
5
1
1. Feed Deck
Stack media for printing here.
2. Side Guides
Help confine the stack. Adjust to the width of your
material plus 1/16" clearance.
3. Separators
Adjust to the thickness of your material. The gap
between the four separator fingers and the feed rollers
should be just enough to allow a single piece to feed
through the printer.
4. Feed Rollers
Feed material through to the printing area.
5. Ruler
Helps center the media in the hopper and sets the
adjustment of the side guides.
2
4
SV60970-OG Rev. A
6
7
Advertisement
Table of Contents
