Table of Contents
Advertisement
Poor Print Quality
(continued)
SV60970-OG Rev. A
DA900 AddressRight
•
Running low on ink. Replace cartridge.
Print streaking/smearing on material
•
Envelope thickness adjustment too low. Raise
printheads.
•
Exit roller dirty. Clean exit roller with water.
•
Printhead dirty. Clean printheads.
•
Ink is not being absorbed because paper is coated
or plastic. Use fast-dry ink.
•
You are printing in high resolution mode on glossy
media. Change print quality, or use W853 dryer, or
use fast-dry ink.
•
High humidity is slowing down drying time. Use
fast-dry ink.
White lines/streaks in a line of print or in graphics
•
Cartridge not properly inserted. Remove and rein-
sert the cartridge into the carriage holder.
•
Ink cartridge nozzle crusted over. Clean with lint-
free, dampened cloth.
•
Cartridge was hit, shaken or dropped. Replace
cartridge.
•
Tap water was used to clean cartridge and mineral
deposits have blocked the ink chamber. Replace
the cartridge and use only distilled water to clean
printheads.
•
Wrongly directed or forceful wipes have driven par-
ticles into nozzles. Replace the cartridge. Clean
printheads as directed in Chapter 6—Maintenance.
•
Addresses not positioned properly; too close to
center of media.
8
™
Printer
8-7
Advertisement
Table of Contents
