Configuring The Cpu Password - Siemens SIMATIC S7-200 System Manual

Basic Concepts for Programming an S7-200 CPU

Configuring the CPU Password

You can use STEP 7-Micro/WIN 32 to create the password for the CPU. Select the
menu command View > System Block and click the Password tab. See
Figure 4-14. Enter the appropriate level of access for the CPU, then enter and
verify the password for the CPU.
System Block
Analog Input Filters
Port(s)
Configuration parameters must be downloaded before they take effect.
Not all PLC types support every System Block option. Press F1 to see which
options are supported by each PLC.
Figure 4-14
4-28
Pulse Catch Bits
Retentive Ranges Password
Full Privileges (Level 1)
Partial Privileges (Level 2)
Minimum Privileges (Level 3)
Password:
Verify:
Configuring a Password for the CPU
Background Time
Output Table
Input Filters
OK
S7-200 Programmable Controller System Manual
Cancel
A5E00066097-02