Pulse Catch Configuration Screen - Siemens SIMATIC S7-200 System Manual

To access the pulse catch configuration screen, select the menu command
View > System Block from the main menu bar and click on the Pulse Catch Bits
tab. Figure 6-7 shows the Pulse Catch configuration screen. To enable the pulse
catch function on a particular input, click the corresponding checkbox.
System Block
Port(s)
Analog Input Filters
Select desired inputs
Configuration parameters must be downloaded before they take effect.
Not all PLC types support every System Block option. Press F1 to see
which options are supported by each PLC.
Figure 6-7
S7-200 Programmable Controller System Manual
A5E00066097-02
Retentive Ranges Password
Pulse Catch Bits
7 6 5 4 3 2 1 0
I0.x
I1.x

Pulse Catch Configuration Screen

CPU and Input/Output Configuration
Output Table Input Filters
Background Time
Defaults
OK Cancel
6-7