Viessmann VITOCAL 300-A Installation And Service Instructions Manual page 13

Internal heat pump, type AWC-I-M
Outlet side on the left, inlet side on
the right
A
Wall outlet
In unfinished buildings, the relevant
thickness of render and plasterboard
must be taken into account for
dimension x:
x = 509.5 mm + end coating/thickness
of render
Preparing for installation
(cont.)
B
EPP wall outlet
C Top edge – finished floor
EPP Expanded polypropylene
Example:
End coating/thickness of
render = 15 mm
x = 509.5 mm + 15 mm = 524.5 mm
13