Ricoh M160 Service Manual page 743

Communication Switch 18 (SP No. 1-104-025)
No Function
IP-Fax dial-in routing selection
5 0: Off
1: On
6-7 Not used
Communication Switch 1B (SP No. 1-104-028)
No Function
Extension access code (0 to 7)
to turn V.8 protocol On/Off
0-7
0: On
1: Off
Communication Switch 1C (SP No. 1-104-029)
No Function
Extension access code (8 and
9) to turn V.8 protocol On/Off
0-1
0: On
1: Off
M160/M161 Fax Option
Comments
1: Transfers received data to each IP-Fax
dial-in number.
IP-Fax dial-in number is a 4-digit number.
Do not change these settings.
Comments
If the PABX does not support V.8/V.34 protocol
procedure, set this bit to "1" to disable V.8.
Example: If "0" is the PSTN access code, set
bit 0 to 1. When the machine detects "0" as the
first dialed number, it automatically disables V.8
protocol. (Alternatively, if "3" is the PSTN
access code, set bit 3 to 1.)
Comments
Refer to communication switch 1B.
Example: If "8" is the PSTN access code, set
bit 0 to 1. When the machine detects "8" as the
first dialed number, it automatically disables V.8
protocol. (If "9" is the PSTN access code, use
bit 1.)
87
Bit Switches - 3
SM